Project Overview
Haoxing Machinery completed factory inspection, packing and loading of a PCB dismantling machine for circuit board component removal and downstream recycling.
Haoxing Machinery has completed the factory preparation and loading of a PCB dismantling machine for customer delivery. The equipment is designed for the controlled removal of mounted electronic components from prepared waste printed circuit boards before the boards and released components enter their respective downstream recovery routes.
For this shipment, our production and loading teams checked the machine body, heating section, rotating and screening assemblies, guarding, electrical connections, fasteners and packed accessories against the delivery list. The main unit was cleaned after the factory inspection, protected at exposed connection points and positioned for stable transport.
Purpose of the Delivered PCB Dismantling Machine
The PCB dismantling machine is not a fine crusher. Its task is to heat prepared circuit boards under controlled operating conditions so that solder joints soften or melt, allowing rotation, agitation and screening to release capacitors, resistors, chips, connectors and other mounted parts from the board substrate.
Separating components before fine size reduction gives the recycling plant more control over the next processing stage. Released components and stripped boards can be collected separately according to the customer’s recovery plan, while unsuitable batteries, closed containers and hazardous components must be removed before feeding.
Pre-Shipment Inspection and Packing
Before loading, our team confirmed that moving parts rotated without abnormal obstruction, guards and access points were secured, electrical terminals were protected, and loose accessories were identified for installation. Transport supports and fastening positions were checked to reduce movement during handling and road transportation.
The loading arrangement was planned around the equipment dimensions and center of gravity. Contact surfaces were protected where necessary, and the machine was secured so that the frame, control components and external connections would not carry unnecessary transport loads.
How the Machine Fits into a PCB Recycling Process
A typical circuit board recycling route begins with receiving inspection and removal of batteries, capacitors requiring separate handling, heat sinks, large metal housings and other unsuitable items. Prepared boards then enter the dismantling stage. After component removal, the separated streams can proceed to crushing, screening, dust collection and metal recovery according to the required product specification.
Where downstream material contains exposed iron or steel, a magnetic separator may be used after suitable size reduction. An eddy current separator can recover conductive non-ferrous pieces from an appropriately prepared non-metallic stream, but separator selection depends on particle size, liberation, moisture and the composition of the feed.
Information Required for Project Configuration
PCB construction varies considerably between household electronics, industrial controls, communication equipment and automotive electronics. For equipment selection, customers should provide representative board photographs, board dimensions, component density, hourly capacity, power supply and the intended route for the separated boards and components.
As a scrap metal recycling equipment manufacturer, Haoxing Machinery reviews the complete process rather than treating the dismantling machine as an isolated unit. Heating conditions, residence time, discharge arrangement, dust treatment and downstream separation should be matched to the actual boards and local operating requirements.
Shipment Follow-Up
After delivery, installation should follow the equipment layout, electrical drawings and operating instructions supplied with the project. The machine must be commissioned with prepared test material, beginning at a controlled feed rate while the operator checks temperature, residence time, component release and discharge condition.
Haoxing Machinery will continue to support equipment installation, operating adjustments and process coordination after the machine reaches the customer’s site. Customers preparing a similar project can send board samples, photographs or a short material video so that our team can evaluate the dismantling and downstream recycling requirements.