Explore scrap metal recycling lines for steel crushing, baled scrap shredding, aluminum processing and mixed metal sorting, configured by material, capacity and required output.
A recycling line should be configured around the actual scrap material and the required downstream result. Loose light steel, compressed metal bales, mixed aluminum scrap, long aluminum profiles and prepared mixed-metal fractions do not require the same main machine or separation route.
The pages below separate these applications into five practical line types. Each line page explains the suitable feed, main process, optional equipment, output condition and information required before quotation.
Open a line page to review its processing purpose, equipment sequence and selection boundaries.
1
Configurable scrap metal processing line with feeding, optional shredding or crushing, magnetic separation, screening, sorting and dust collection.
View Details →
2
Scrap steel shredding line for coarse size reduction of bulky and irregular ferrous scrap, with controlled feeding and optional magnetic separation.
View Details →
3
Aluminum scrap recycling line for selected sheets, cans, profiles and cast parts, with shredding, crushing, iron removal and optional sorting.
View Details →
4
Aluminum profile crushing and sorting line for window frames, extrusion offcuts and thermal break profiles, with iron removal and screening.
View Details →
5
Baled scrap shredding line for controlled feeding, bale opening and coarse shredding of compressed steel, aluminum and selected mixed metal bales.
View Details →
6
Mixed metal sorting line with magnetic separation, screening and eddy current sorting for prepared ferrous, non-ferrous and non-metal fractions.
View Details →A complete line does not automatically require every processing stage.
Low-speed, high-torque tearing opens bales and reduces bulky material into coarse pieces.
High-speed hammer impact and a screen reduce prepared scrap to a controlled maximum size.
Exposed iron and steel are recovered after sufficient opening or material liberation.
Material is divided into more suitable size fractions for recirculation or downstream sorting.
Suitable conductive non-ferrous metals are recovered from prepared and evenly distributed material.
Dust collection is configured according to crushing points, transfers, material condition and local requirements.
Review real equipment configurations, processed materials and project records.
Scrap steel crusher for crushing car shells, appliance shells, paint buckets, oil drums, metal sheets and light scrap steel in metal recycling lines.
View project →
Haoxing Machinery twin shaft shredder is designed for scrap metal recycling, with low-speed high-torque shredding performance for scrap steel, aluminum scrap, metal drums, bales and mixed industrial waste.
View project →
Haoxing Machinery eddy current separator separates aluminum, copper and other non ferrous metals from crushed scrap metal, electronic waste, automotive shredder residue and mixed recycling materials.
View project →
Can flattening machine for reducing the volume of loose aluminum cans, UBCs and tinplate cans before storage, transportation, baling or further recycling.
View project →The same capacity figure can require a different machine configuration when the feed density, dimensions, composition or expected output changes.
Haoxing Machinery will review the actual feed and recommend a suitable crushing, shredding or sorting route.
