Project Overview

Project Summary

Customer-site photos show aluminum can bales arranged beside a Haoxing Machinery twin shaft shredder used for bale opening and coarse size reduction.

The customer-site photos show aluminum can bales arranged beside the processing area and the twin shaft shredder installed for bale opening and coarse size reduction. The bales are kept in a clear staging area so the operator can inspect their condition before feeding.

Baled beverage cans are compact and convenient to transport, but the compressed blocks must be opened before stable downstream conveying and sorting. In this project, the shredder is used to break the bale structure and release the individual cans and compressed layers. It is not being used as a fine crusher.

Material Condition at the Customer Site

The photographed bales contain compressed aluminum cans. Before operation, the customer checks bale dimensions, bale weight, binding material and visible contamination. Steel strapping, excessive plastic, liquid-filled containers and unrelated solid metal pieces can change the load on the cutters and must be handled according to the agreed feeding procedure.

Keeping the bales arranged separately also makes it easier to avoid feeding two blocks at the same time. A controlled sequence is important because bale density and compression vary from one supplier or collection batch to another.

Role of the Twin Shaft Shredder

The twin shaft shredder works at low speed with high torque. Counter-rotating cutters grip the aluminum can bale, tear open the compressed block and reduce the material into looser pieces that can leave the chamber more consistently.

For this application, the objective is opening and coarse shredding. Final particle size depends on the cutter arrangement, bale condition and any later crushing or screening stage. The correct process should be selected from the required downstream product rather than treating shredding and crushing as the same operation.

Feeding and Site Operation

Bales should be placed into the feeding area one at a time and aligned so the cutters can engage the block steadily. The operator monitors motor load, shaft reversal and discharge condition during the first batches, especially when bale density or contamination changes.

Closed containers, batteries and pressurized items must not be mixed into the feed. Residual liquid should be controlled, and the area around the machine should remain clear for inspection and cleaning.

Connection with Downstream Recycling

After coarse shredding, the opened material can be sent by conveyor to further crushing, screening or separation. If steel closures, wire or other ferrous pieces are present, a magnetic separator may be included after suitable material preparation.

The full route may also include a can crusher when a smaller and more uniform product is required. The combination depends on whether the customer needs simple bale opening, volume reduction, furnace feed preparation or a complete aluminum can recycling process.

Information Needed for a Similar Project

For a similar project, customers should provide bale dimensions, average and maximum bale weight, estimated bale density, strapping type, contamination, required hourly quantity, desired output condition and available installation space.

As a scrap metal recycling equipment manufacturer, Haoxing Machinery reviews the actual bale condition and the equipment before and after the shredder. The customer-site photos document the material staging and installed machine, while final capacity and output must be confirmed from representative bales and operating requirements.

Related Equipment

Equipment Used In Similar Recycling Projects

Core machines for scrap metal crushing, shredding and non-ferrous metal separation.

FAQ

Common Questions About This Case

Frequently asked questions about scrap metal recycling equipment and project configuration.

What materials can this recycling line process?

The line can process scrap steel, aluminum, car shell, light metal and mixed metal materials.

Can the system separate aluminum from mixed scrap?

Yes. Eddy current separator can recover non-ferrous metals such as aluminum and copper.

Can HX Machinery customize the equipment layout?

Yes. The production line can be customized according to material type, capacity and output size.

Is this template suitable for different case pages?

Yes. This layout can be used for shipment site, factory production, installation site and crushing test pages.

Need A Customized Metal Recycling Solution?

Contact HX Machinery for scrap metal crusher, shredder, eddy current separator and complete recycling production line.

WhatsApp
💬
WhatsApp
WhatsApp QR Code
Scan or click to chat with us on WhatsApp.
⬆