News and Insights | Scrap Metal Recycling Equipment Industry

Industry News 2026-05-15

Focus on Efficient Recycling of Scrap Motors: Overseas Customer Visits Haoxing Machinery for On-Site Inspection of Scrap Motor Crushing Line

Haoxing Machinery welcomed four Indian recycling customers for a factory visit and technical exchange on scrap motor crushing and recycling solutions. The article introduces scrap motor processing difficulties, large crusher configuration, anti-jamming design, screen mesh customization, enclosed conveying, dust collection, magnetic separation, eddy current separation, and customized copper-iron recovery systems.

Industry News 2026-05-15

Lumpy Aluminum Chips vs. Fine Powder Aluminum Chips: Three Major Drawbacks of Using the Same Crusher and Retrofitting Solutions

In aluminum chip recycling, lumpy chips (loose, entangled, bulky) and fine powder chips (dense, oily, compacted) have significantly different physical characteristics. However, many users process both materials with the same aluminum chip crusher, leading to low efficiency and frequent breakdowns. Based on years of field experience, Haoxing Machinery Factory has summarized three major drawbacks and corresponding retrofitting solutions for your reference.

Industry News 2026-05-13

Analysis of Scrap Aluminum Crusher Capacity Gap: Why Is the Rated 5 Tons/Hour Only 3 Tons in Practice? Five Real Factors

Learn why a scrap aluminum crusher rated at 5 tons per hour may only produce around 3 tons in real operation. This article explains five key factors including feedstock impurity content, improper screen mesh size, excessive hammer wear, uneven feeding, motor power, and drive efficiency, helping recycling plants identify bottlenecks and improve actual crusher output.

Industry News 2026-05-09

Low Output of Scrap Motor Crusher 3 Key Factors Directly Affecting Iron Recovery Efficiency

Learn why scrap motor crushers suffer from low output and poor iron recovery. This article explains how cutter wear, blade clearance, rotor speed, torque mismatch, magnetic separator intensity, belt speed, and material layer thickness affect crushing capacity and iron separation efficiency. Practical optimization methods help improve iron recovery, reduce fines, and increase production efficiency.

Industry News 2026-05-06

Selection of Aluminum Scrap Crushers: Uncovering the Golden Power Zone Why More Power Can Backfire

Learn how to choose the right motor power for an aluminum scrap crusher and avoid the mistake of oversizing. This article explains the golden power zone, energy consumption per ton, torque density, hammer tip speed, screen aperture, over-grinding risks, and real data comparisons between 75 kW, 90 kW, and 132 kW aluminum crusher models.

Industry News 2026-04-29

Hammer Economics: High-Chrome Hammer Costs Twice as Much as High-Manganese Steel, but Does It Last 3 Times Longer Real Test Data

Compare high-chrome cast iron hammers and high-manganese steel hammers for aluminum scrap shredders based on real test data. This article analyzes material differences, wear mechanisms, measured service life, cost per ton, chipping risk, downtime reduction, and how to choose the right shredder hammer according to aluminum scrap quality and iron removal conditions.